FOM combines two quantities
Figure of merit combines limiting resolution and signal-to-noise ratio: FOM = resolution × SNR. Resolution is commonly reported in line pairs per millimeter. FOM is one comparison measure, not an overall score for a complete goggle.
| Illustrative tube | Resolution (lp/mm) | SNR | Calculated FOM |
|---|---|---|---|
| A | 64 | 30 | 1,920 |
| B | 80 | 24 | 1,920 |
These invented values demonstrate the arithmetic; they do not represent products or measured performance. The equal result conceals different inputs. Neither row establishes detection distance, viewing comfort, optical quality or installation suitability.
Read beyond the combined number
Resolution concerns distinguishable detail; SNR concerns signal relative to noise under the stated test conditions. Gain describes amplification. Auto-gating concerns the tube's response to changing illumination. These are separate characteristics, so compare them separately.
Ask suppliers to explain the specified halo, equivalent background illumination and image-quality acceptance criteria for the offered tube. Request their definitions, units and test conditions. A term without its measurement context is not a reliable comparison.
Also identify the photocathode technology, phosphor, electrical interface and compatible housing. A generation label, marketing family or phosphor color does not completely specify the assembly.
Separate a specification from an individual result
A guaranteed minimum, a typical catalogue value and a result for an individual tube serve different purposes. Identify which one appears in each quotation. For a dual-channel system, ask whether data are supplied for both tubes and how the assembler evaluates the pair.
- Does the data sheet identify the tube delivered?
- Do its values use the same definitions and test conditions as the competing offer?
- What acceptance criteria apply to image blemishes and where they appear?
- Which complete-device checks does the assembler perform?
- What documents accompany replacement tubes or service work?
Retain the original supplier data with the quotation. A photograph through an eyepiece can be useful supporting material, but camera settings and lighting can change its appearance.
Connect the numbers to the task
Write down the information the user needs to recognize, expected illumination, optical configuration and acceptable behavior. Ask the supplier how the proposed equipment will be evaluated against those needs. Use comparable demonstration conditions rather than differently exposed images.
The data sheet also gives the integration team a starting point. Proposed sensor windows, filters or optical changes must preserve the requirements relevant to the actual sensor and assembly. Discuss an optical integration question with FPD.DEV when that interface needs engineering work.
Common questions
Can I rank goggles by FOM alone?
FOM combines two tube characteristics. It does not include every tube property, the optics, fit, support or the complete viewing task.
Should I ask for individual tube data?
Ask what serial-specific evidence is available and what the supplier guarantees. Record gaps rather than assuming a typical catalogue figure describes the delivered tube.
Sources & further reading
Use the current manufacturer documents and the issue of each standard specified by your program. The checklists here are engineering guidance, not quoted standard requirements.